|
|
 LATEST
COMMENTS FROM PILOTS for
MHGDC
Mini
Hobby
Gear & Doors Computer sequencer |
|
- BVM
0816/01. !! You have a good product
!!
- Jack Diaz 08/17/01. Mr. Diaz
found a very nice and interesting feature about the MHGDC, after
programming the ATV for Gear & Doors, the gear channel now is
almost a free channel, that can be shared with the gyro gain
selector with a " Y " extension in the gear channel. After
the programming is done, you set the appropriate Gyro gains without
any effect in the gear positions, guess what, one more channel.!!!
thanks again Jack.
- (Spanish)
Una vez que tu programas los travels del tren y de las puertas, el
canal de gear te queda practicamente como un canal libre para el
gain del giroscopo.
Por lo general uno ajusta los gains del gyro de acuerdo a si el
tren esta
arriba o abajo. En este caso tu connectas el gain con una Y en el
canal del
tren.. Y una vez que programas tu aparato, le pones los gains
deseados al
Gyro sin que se afecten las posiciones del tren. O sea: un canal
mas.
- Antonio Tahan 08/20/01. After
several month of flight testing with assorted radios and
installations from many different pilots, I found MHGDC
sequencer as a one of my best gizmos.
Thanks to all the pilots that contribute to the design and testing
of the unit.
- Cato Horten 03/03/03 . Hello, At the last Florida Jets
I bought 2 pcs of your Gear & Door Computer sequencer. What
a fantastic product. In my 1/7 Yellow F-18 Hornet
I use 2 psc SimJet gas turbines with the total of 60 pound of
thrust and I have to thrust the gears to work every time. Your
unit seems to be extremely safe and easy to install.
Thank you for making this fantastic product.
Best Regards
Cato Horten
Norway
BACK TO TOP
|
